Intermec CN2A Mobile Computer

Intermec CN2A Mobile Computer

Features

  • PDA form factor built to withstand the rigors of field use
  • Delivers improved TCO over commercial grade devices
  • Features and functionality common to higher priced, larger mobile devices
  • Choices of radios, keypads and platforms to fit the job at hand
  • SmartSystem™ device management capabilities for batch or real-time updates and maintenance

The powerful Intermec CN2 family, including the Intermec CN2A and CN2B, combines the convenience of shirt pocket size for the ultimate in mobility, with all the ruggedness and reliability you’ve come to expect from Intermec, the number one supplier of rugged pocket PCs for the enterprise.1

While the Intermec CN2A, with either batch or local area radio connectivity, is ideally suited for Store Operations/ Management applications within the Retail industry, the Intermec CN2B offers the addition of Microsoft® Windows Mobile and Bluetooth support, a good fit for Field Service, Direct Store Delivery, or In-Transit Visibility applications that can run in near-real-time by connecting to a mobile phone when integrated WWAN capabilities are not required.

While the Intermec CN2 family shares the compact form factor of a commercial PDA, including single-handed operation, the similarities stop there. The thoughtfully designed feature set is packaged to survive heat, humidity and multiple drops to concrete or steel, allowing you to minimize your total cost of ownership. Research has proven that investments in rugged mobile computing devices versus commercial grade pay off in a lower total cost of ownership as early as two years into the life of the device.2

Device management capabilities are uncommon for this class of mobile computer; however the Intermec CN2A has integrated Intermec’s SmartSystems™, a centralized one-to-one device management solution for remote support capability. The Intermec CN2 family also features Wavelink Avalanche™ for remote maintenance of entire populations of devices. Both solutions allow the user to configure, update or maintain the Intermec CN2 mobile computers in real time or batch saving time and money.

This mobile computer family relies on the proven, powerful combination of the Intel® XScale™ processor with either the Microsoft® Windows CE or Windows Mobile operating system to deliver a perfect balance of real-time data collection performance with fullshift power management functionality required by the application demands of retail store management and field sales and service.

In addition, the Intermec CN2 family relies on Intermec’s WiFi® certified 802.11 b/g radio, which ensures consistent performance by providing the best available wireless network throughput and reliability.

The Intermec CN2A leverages the Intermec® EV10 linear scan engine with 3.3V low power operation to preserve battery life for mobile computing applications. With no moving parts and no laser diode, the EV10 has a longer life than any laser scanner (MTBF above 250Kh). The Intermec CN2A received Cisco Certified Extension (CCX) ensuring compatibility with a Cisco infrastructure.

The user accessible secure digital card slot provides more than sufficient data storage and back up capabilities for today’s demanding applications.

1 Venture Development Corporation (VDC); Intermec ranked #1 for 2004 Global Rugged
Computer Market
2 TCO Models for Mobile Computing and Communications Platforms, VDC, Dec. 2003

Specifications

Physical Description:
The Intermec CN2 family are rugged pen based handheld mobile data collection computers featuring an embedded Microsoft® Windows® operating system and an Intel™ XScale™ PXA255 processor.
Operating System:
Microsoft Windows CE .NET 4.2
Radio:
Integrated 2.4 GHz IEEE 802.11g and IEEE 802.11b

Physical Characteristics
Length: 147 mm (5.8 in.)
Width: 86 mm (3.4 in.)
Height: 35 mm (1.4 in.)
Weight: 370 grams (11.9 oz.)

Hardware
Microprocessor: Intel Xscale PXA255, 400 MHz
Memory: 128 MB SDRAM and 64 MB non-volatile Flash
Memory/Storage Extension: Secure Digital (SD) card slot, user accessible. Up to 1GB storage capacity.

Bar Code Scanning
Scan Engine: Integrated 1D linear imager
Symbologies Read: Supports many popular 1D symbologies including: Codabar, Code 39, Code 128, Interleaved 2 of 5, and limited forms of EAN and UPC.

Power
Battery Type/Supply: Lithium-Ion 2150 mAh, 3.7V with 5 minutes NiMH RAM backup
Battery Life: 8-12 hours, application dependent
Recharging Time: 4 hours

Environment
Operating Temp: 0° to 50° C (32° to 122° F)
Storage Temp: -10° to 50° C (14° to 122° F)
Environmental Protection: IP64 certified
Drop Survival: Multiple 3ft. drops to steel or concrete

Humidity: 5 to 95% non-condensing
Electrostatic Discharge: 6KV contact, 12KV air
Vibration and shock protection: Tested to MIL-PRF-28800F standards

Display
240 x 320 (1/4 VGA) transflective display with 3.5” diagonal supporting 16-bit color depth (65K colors) and resistive panel touch screen. Integrated stylus storage slot.

Keypads
Elastomeric keypad with 18 key numeric layout.

Software
Development Environments: Embedded Visual C++ 4.0, .NET Compact Framework (VB .NET and C#)
Browser support: IE6 compatible
Software Development Kit: Supports device-specific features and bar code scanning
Bundled productivity applications: WordPad, Transcriber and Imager scan demo program

Scan Activation
Left/Right scan buttons, with continuous scan mode.

Integrated Radio
Data Rates: Up to 54 Mbps with 802.11g; 11 Mbps with 802.11b
Antenna: Internal
Standards Compliant: IEEE 802.11g (2.4 GHz - OFDM), IEEE 802.11b (2.4 GHz - DSSS)
Radio Power: 802.11g – 16mW, 802.11b – 30mW
Security: WEP, WPA, 802.1x (EAP-TLS, TTLS, LEAP, PEAP)
Certifications: Wi-Fi, WPA, Cisco Compatible logo indicates compatibility with a Cisco infrastructure

Device Management
SmartSystem™ Support: A centralized one-to-one device management solution for remote support capability. Also features Wavelink Avalanche™ for remote maintenance of entire populations of devices. Both solutions allow the user to configure, update or maintain the CN2 mobile computers in real time or batch.

Speaker
Loud (80 dB) programmable “beeper” with adjustable frequency and duration for scanning feedback or audio indicator under program control. The CN2B features an audio jack.

Power
Battery Type/Supply: Lithium-Ion 2150 mAh, 3.7V with 5 minutes NiMH RAM backup
Battery Life: 8-12 hours, application dependent
Recharging Time: 4 hours

Accessories
Communications and charging dock: Single bay communications cradle with USB or V90 modem dock
I/O interface: USB version 1.1 (through dock)
User Accessories: holster, spare battery, hand strap, stylus kit, screen protector kit

Regulatory Approvals
UL and cUL Listed, UL 60950 and UL 1604 and CSA 22.2 No. 157, FCC Part 15, TUV, CE mark

Download

Getting Started

Contact Us

9 Compark Circuit
Mulgrave, Victoria 3170

1 3000 gamma
1 3000 42662
+613 8562 3000
1 3005 55592
+613 8562 3001

Copyright © 1997 - 2016 Gamma Solutions. All rights reserved unless otherwise stated.

SEO & Website Design by eCreative Solutions